Large Silos

Small on‑farm silos are increasingly used to store grain before sale or livestock use, but effective phosphine fumigation requires gas‑tight, pressure‑tested sealing to Australian Standard AS2628, a five‑minute half‑life. In unsealed silos, target concentrations of 300 ppm for seven days or 200 ppm for ten days cannot be maintained, so pests survive at some life stages and resistance increases, and many silos sold as “sealed” are not truly gas‑tight, making them unsuitable for fumigation.

Medium-capacity on‑farm silos are increasingly used to store grain before sale or livestock use, but effective fumigation with phosphine requires silos to be genuinely gas‑tight and pressure‑tested to Australian Standard AS2628 (five‑minute half‑life). In unsealed silos, required concentrations of 300 ppm for seven days or 200 ppm for ten days cannot be maintained, so pests survive at some life stages and resistance increases; many silos marketed as “sealed” are not gas‑tight and are unsuitable for fumigation.

Temporary grain storage is an inexpensive alternative to permanent systems, with metal wall storages most common, followed by concrete walls, and dirt bunkers used briefly in emergencies. Loss risk is higher due to leaking tarpaulins from bird damage and ground flooding, and more fumigant is typically required because sealing the tarpaulin to the floor and wall is challenging.<br><br>Fumigating unsealed bunkers does not kill pests at all life stages, and repeat fumigations increase resistance and select for higher phosphine tolerance, effective control requires phosphine concentrations of 300 ppm for seven days or 200 ppm for ten days, levels that trials show are impossible to maintain in unsealed bunkers, so surviving eggs and pupae will continue to develop and reinfest the grain.

Tarpaulin sealing ensures water‑tight and gas‑tight coverage for temporary grain bunkers, critical for effective fumigation and preventing insect resistance. PPE and PE tarpaulins have low surface adhesion, so <a href='/products'>Global TarpSeal RB</a>, a solvent free acrylic rubber filled lightweight membrane with high adhesion and optional fiber reinforcement, is used for reliable sealing, while PVC offers broader product compatibility including <a href='/products'>Glo-Mastic</a>, a solvent free acrylic membrane that can also be fiber reinforced. Achieving and maintaining phosphine concentrations at 300 ppm for seven days or 200 ppm for ten days requires properly sealed seams, since unsealed bunkers cannot sustain these levels and will not kill pests at all life stages.

Global’s seamless membranes waterproof warehouse and factory roofs via airless spray for a continuous water‑tight finish. <a href='/products'>Novalast 151 LTM</a>, a solvent‑free acrylic membrane with 350% elongation at 2mm, provides durable sealing on metal, masonry, fibro, and concrete, reducing internal temperatures by up to 40%. Proven on a 52,000 m² roof in Canning Vale, Western Australia.